{"product_id":"sublimation-blank-beverage-holder-white","title":"12 oz Standard Can Coozie Sublimation Blank Beverage Holder - WHITE","description":"Double-wall vacuum insulated bottle \u0026amp; can beverage holder\n\u003cul\u003e\n\u003cli\u003eKeeps drinks hot\/cold all day\u003c\/li\u003e\n\u003cli\u003e18\/8 stainless steel (304 food grade) with seamless construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\nUSING A MUG PRESS:\u003cbr\u003e\u003cbr\u003eNote: Because not all mug presses are created equally the dwell time in a\u003cbr\u003epress can vary. The settings below are based on a GKDK3 mug press from George\u003cbr\u003eKnight.\u003cbr\u003e\u003cbr\u003e2nd Note: Be sure that the artwork does not go beyond the size limits of the\u003cbr\u003emug press.\u003cbr\u003e\u003cbr\u003e3rd Note: Because of the gap where the mug press closes you will not be able\u003cbr\u003eto have the artwork wrap around the entire beverage holder.\u003cbr\u003e\u003cbr\u003eSupplies needed:\u003cbr\u003e- sublimatable substrate (beverage holder)\u003cbr\u003e- sublimation transfer\u003cbr\u003e- scratch paper\u003cbr\u003e- heat tape\u003cbr\u003e\u003cbr\u003eMug heat press settings:\u003cbr\u003e- temperature - 380 degrees F\u003cbr\u003e- dwell time - 1 - 1:15 minutes\u003cbr\u003e- pressure - light to medium\u003cbr\u003e\u003cbr\u003eSteps:\u003cbr\u003e1. Remove the top of the beverage holder\u003cbr\u003e2. cut your transfers so that the transfer is slightly larger vertically than\u003cbr\u003ethe beverage holder.\u003cbr\u003e3. Position the substrate onto the transfer.\u003cbr\u003e4. Tape two ends of the transfer allowing for the gap in the mug press where\u003cbr\u003eit will close.\u003cbr\u003e5. Wrap a piece of scratch paper around the transfer and beverage holder\u003cbr\u003etaping if necessary.\u003cbr\u003e6. Center the transfer and beverage holder in the mug press.\u003cbr\u003e7. Close the mug press using the heat press settings above.\u003cbr\u003e8. Remove items from the press immediately. Use heat resistant gloves if\u003cbr\u003enecessary - the items will be very hot.\u003cbr\u003e9. Remove transfer and scratch paper.\u003cbr\u003e\u003cbr\u003eTips:\u003cbr\u003e- If the image of the final product appears light increase the pressure or\u003cbr\u003ethe dwell time slightly (10-15 seconds).\u003cbr\u003e- If the image on the final product appears blurred or substrate appears\u003cbr\u003eyellowed or has brown spots on the rim of the top or bottom of the beverage\u003cbr\u003eholder reduce the dwell time slightly (10-15 seconds).\u003cbr\u003e- Too much pressure can cause trapped moisture in the paper to \"jet\" away\u003cbr\u003epulling ink with it in a spiked-peaked formation. To avoid this reduce the\u003cbr\u003epressure.\u003cbr\u003e- Take care when applying pressure as too much press can cause the beverage\u003cbr\u003eholder to bend slightly which will prevent the lid from fitting properly.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIN A CONVECTION OVEN (with Silicone Wrap - MGWRP6):\u003cbr\u003e\u003cbr\u003eNote: Because not all ovens are created equally the dwell time in an oven can\u003cbr\u003erange from 3:30 to 4:30 minutes. Convection oven is recommended.Settings will\u003cbr\u003evary depending on the oven brand and model ink and paper and atmospheric\u003cbr\u003econditions.\u003cbr\u003e\u003cbr\u003e2nd Note: Be sure that the artwork does not go beyond the size limits of the\u003cbr\u003ewrap.\u003cbr\u003e\u003cbr\u003eSupplies needed:\u003cbr\u003e- sublimatable substrate (polar camel)\u003cbr\u003e- sublimation transfer\u003cbr\u003e- scratch paper\u003cbr\u003e- Silcone Wrap (MGWRP6)\u003cbr\u003e- heat tape\u003cbr\u003e- convection oven\u003cbr\u003e\u003cbr\u003eOven settings:\u003cbr\u003e- temperature - 380-400 degrees F\u003cbr\u003e- dwell time - 3:30 to 6 minutes\u003cbr\u003e\u003cbr\u003eSTEPS:\u003cbr\u003e1. Position transfer onto the substrate using heat tape to secure the transfer\u003cbr\u003eto the substrate.\u003cbr\u003e2. Cut a piece of scratch paper to tape over your artwork transfer this\u003cbr\u003eprotects your wrap from ink.\u003cbr\u003e3. Use the silicone wrap to secure the transfer to the Polar Camel start\u003cbr\u003ewrapping the Polar Camel by stretching and rolling the silicone over top of\u003cbr\u003eitself. Make sure to start wrap in a non artwork area to prevent a line in\u003cbr\u003eyour artwork.\u003cbr\u003e4. Put a piece of heat tape around silicone wrapped Polar Camel to secure\u003cbr\u003ewrap.\u003cbr\u003e5. Place Polar Camel in oven with recommended settings listed above.\u003cbr\u003e6. Pull from oven and remove wrap and paper. Caution contents will be hot\u003cbr\u003euse heat resistant gloves for safety.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTips:\u003cbr\u003e- If the image of the final product appears light increase the pressure or\u003cbr\u003ethe dwell time slightly (30-45 seconds).\u003cbr\u003e- If the image on the final product appears blurred or substrate appears\u003cbr\u003eyellowed or has brown spots reduce the dwell time slightly (30-45 seconds).","brand":"Bulk Tumblers","offers":[{"title":"White","offer_id":32153647775814,"sku":"CK WHITE SUB THICK RING","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/3970\/1807\/products\/factory_seconds_can_cooler_bffd4dbe-7dad-4b75-bcd7-5c0de5c93fbf.jpg?v=1629750366","url":"https:\/\/hotbulktumblervogue.com\/products\/sublimation-blank-beverage-holder-white","provider":"Bulk Tumblers","version":"1.0","type":"link"}